Air pumps - air source

Bubbler right 75cm, designed to oxygenate the nutrient solution of your hydroponic or your aquarium.

Buller law 75cm by Boyu Running with an air pump, the bubbler will allow you to make an effect jacuzzi in your nutrient solution to mix it thoroughly. But you can also use it in your aquarium. Length: 75cm Available in 25,50,60 and 75cm.

This air compressor will serve you well in order to provide aeration and oxygenation of the water, in the nutrient solution of your growing system or in your aquarium.

Air compressor 3000L/h Boyu This air compressor will serve you well in order to provide aeration and oxygenation of the water, in the nutrient solution of your growing system or in your aquarium. Dimensions: 183 x 97 x 116 mm Voltages: 230/115V Frequency: 50/60 Hz Power: 35 W Air flow max: 50 L/min Pressure: 0.028 MPa

This pump can be use to power your air source in the air for your culture system DWC, for example, or your aquarium to oxygenate the water.

Air pump by Boyu This pump can be use to power your air source in the air for your culture system DWC, for example, or your aquarium to oxygenate the water. Dimensions: 70x39,5x36 mm Current: AC220/110/12 V Frequency: 50/60 Hz Power: 1.2 W Flow rate: 2 L/min Pressure: 0.009 MPa

To distribute the output of your air pump to 20 adjustable outputs separately.

The plastic "manifold" is used to automatically control air from one place, by being connected to a pump, the "manifold" distributes the air line to 20 outlets. Its adjustable faucets allow to activate or deactivate the air supply as required. In addition, you can place a bubbler on each output. Input: 18mm Output: 4mm Also available in steel with 2, 3, 4, 5, 6, 8, 10, 12, or 18 outlets And available in plastic with 6, 10, or 20 outputs.